User`s guide

Chapter 5. QLogic Fast!Util
EK–KZPBA–UG. B01 5–3
5.3 Changing Configuration Settings
You can change configuration settings for a particular option, reset all settings to
their defaults, or auto–configure settings.
To change or view configuration settings, follow these steps:
1. Use the arrow keys to move the cursor to
Configuration Settings
on the
Fast!Util
main menu and press the
Enter
key. The
Configuration Settings
menu appears as shown in Figure 5
−
2.
Figure 5−2 The Configuration Settings Menu
QLogic Fast! UTIL Version 1.27
Selected Adapter
Adapter Type I/O Address
PCI Ultra-W 8000
Configuration Settings
Host Adapter Settings
SCSI Device Settings
Autoconfigure SCSI Devices
Restore Default Settings
Use <Arrow keys> to move cursor, <Enter> to select option, <Esc> to backup
2. Use the arrow keys to move to any option on the
Configuration Settings
menu and press the
Enter
key.
5.3.1 Changing Host Adapter Settings
If you need to change Host Adapter settings from their defaults, follow these
steps:
1. Use the arrow keys to highlight
Host Adapter Settings
from the
Configuration Settings
menu and press the
Enter
key. The
Host Adapter
Settings
appear as shown in figure 5
−
3.