User`s guide

EK–KZPBA–UG. B01 5–1
5
QLogic “Fast!Util” (Intel-Systems)
This chapter describes the QLogic “Fast!Util” for the KZPBA-CA adapter in Intel-systems.
5.1 EEROM Parameter Settings
The KZPBA-CA host adapter ships with factory default EEROM parameters that
determine how the host adapter board operates and interacts with connected
devices. The default EEROM parameter settings were chosen to provide the best
performance optimization for most system configurations.
Use
Fast!UTIL
, a ROM-based utility evoked during BIOS initialization, to
change parameter settings in Intel platforms.
5.2 Using
QLogic Fast!Util
(Intel-Systems)
Use the
QLogic Fast!Util
to set EEROM parameters for Intel systems.
To start
QLogic Fast!Util
follow these steps:
1. Turn on the power to your system.
2. Press the
Alt-Q
key combination when the
QLogic Ultra board BIOS
initialization message appears. It appears on your screen during the boot
process. The
QLogic Fast!Util
main menu appears similar to Figure 5
−
1.
NOTE
If you have more than one QLogic PCI Ultra board
installed, the utility prompts you to select which
board you want to configure.