User`s guide

Chapter 4. EEROM Configuration Utility
EK–KZPBA–UG. B01 4–11
4.4.4 Enabling FAST-10 on all Devices Connected to
a FAST-10 Board
To set all devices connected to a FAST-10 board to negotiate for FAST-10,
follow these steps:
1. Use the up and down arrow keys, or type “
f
” to move the bracket selector to
the
Enable (F)AST-10 on all devices
option on
the Configure EEROM
Parameters
menu and press
Enter
to select.
NOTE
This option appears on the Configure EEROM
Parameters menu only if the selected board is
FAST-10.
2. When the screen appears prompting you as follows:
This option will set the synchronous period and offset to FAST-10 defaults.
Do you wish to continue {y/n}?
Type “
y
” to change the settings to FAST-10 on all devices connected to the
specified board.