User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter
4–10 EK–KZPBA–UG. B01
4. When you finish changing device adapter parameters, press the “
o
” key to
save your changes, or press the “
c
” key if you do not want to save changes.
If you press the “
o
” key, a
Write EEPROM Parameters
screen appears. If
you press the “
c
” key, the main menu appears.
5. Press “
y
” to save changes and return to the main menu, or press “
n
” to
return to the main menu without saving changes.
NOTE
If you choose not to save your changes, your
changes will appear on the device adapter
parameters screen until you press
“x”
from the
main menu. Pressing
“x”
from the main screen
clears your changes from the host adapter
parameters screen.
4.4.3 Enabling FAST-20 on all Devices Connected to
a FAST-20 Board
To set all devices connected to a FAST-20 board to negotiate for FAST-20,
follow these steps:
1. Use the up and down arrow keys, or type “
u
” to move the bracket selector to
the
Enable (U)ltra FAST-20 on all devices
option on
the Configure EEROM
Parameters
menu and press
Enter
to select.
NOTE
This option appears on the Configure EEROM
Parameters menu only if the selected board is
FAST-20.
2. When the screen appears prompting you as follows:
This option will set the synchronous period and offset to FAST-20 defaults.
Do you wish to continue {y/n}?
Type “
y
” to change the settings to FAST-20 on all devices connected to the
specified board.