User`s guide

Contents
EK–KZPBA–UG. B01 v
6 Troubleshooting
6.1 Introduction........................................................................................................... 6−1
6.2 System Power-on Problems ................................................................................... 6−2
6.3 SCSI Device Problems ..........................................................................................6−3
6.4 Boot Sequence Problems ....................................................................................... 6−4
A EEROM Parameter Settings
A.1 EEROM Parameter Settings..................................................................................A–1
Figures
2–1 Host Adapter and FAST-10 StorageWorks Shelf................................................... 2–4
2–2 Host Adapter and Ultra SCSI StorageWorks Shelf................................................ 2–5
3–1 KZPBA–CA Single-ended Host Adapter............................................................... 3–3
3–2 Installing the KZPBA–CA Host Adapter............................................................... 3–4
3–3 Installing the 68-pin Cable Connector onto the Host Adapter................................ 3–6
3–4 Installing the 50-pin Cable Connector onto the Host Adapter................................ 3–6
3–5 Connecting Ribbon Cable to Internal SCSI Device ............................................... 3–7
3–6 Connecting Ribbon Cable to Second Internal SCSI Device................................... 3–8
3–7 Connecting External SCSI Cable to Host Adapter................................................. 3–9
3–8 Connecting External SCSI Cable to External SCSI Device.................................... 3–9
3–9 Single Internal SCSI Bus.................................................................................... 3–11
3–10 Two Internal SCSI Buses................................................................................... 3–12
3–11 External SCSI Bus............................................................................................. 3–13
4–1 The ARC Console Screen ..................................................................................... 4–2
4–2 The Select ISP1020/1040 Screen .......................................................................... 4–3
4–3 The EEROM Configuration Utility 1020 Main Menu............................................ 4–5
4–4 The EEROM Configuration Utility 1040 Main Menu............................................ 4–5
4−5 The Edit EEROM Host Adapter Parameters Screen.............................................. 4−7
4–6 Edit EEROM Device Parameters Screen............................................................... 4–9
5−1 QLogic Fast! Util Main Menu .............................................................................. 5−2
5−2 The Configuration Settings Menu......................................................................... 5−3
5−3 Host Adapter Settings........................................................................................... 5−4
5−4 SCSI Device Settings ........................................................................................... 5−6