User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter

4–6 EK–KZPBA–UG. B01

4.4 Changing EEROM Parameters

Tables A–1 and A–3 in Appendix A describe reasons to change the EEROM

parameters. This section describes how to change:

•

Host adapter parameter settings, which control the general operation of the

KZPBA-CA host adapter

and,

•

Device EEROM parameter settings, which control how the KZPBA-CA

interacts with connected devices.

4.4.1 Changing Host Adapter Parameters

To change host adapter parameters, follow these steps:

1. Use the up and down arrow keys, or type “

” to move the bracket selector to

the

Edit EEROM Host Adapter Parameters

option on the

Configure EEROM

Parameters

menu and press

Enter

. The

Edit EEROM Host Adapter

Parameters

screen appears as shown in Figure 4–5.

Refer to Table A–1 in Appendix A for a list of the host adapter parameter default

settings, parameter descriptions, and optional parameter settings.