User`s guide

Chapter 4. EEROM Configuration Utility
EK–KZPBA–UG. B01 4–5
4.3 Using the EEROM Configuration Utility
Use the up and down arrow keys to move the selector brackets [ ].
To begin, move the selector brackets to the
ISP1020/1040
on the
Select
ISP1020/1040
screen, shown in Figure 4
−
2, that you want to configure. The
Configure EEROM Parameters
menu appears as shown in Figure 4–3 for ISP
1020 and in Figure 4
−
4 for ISP 1040.
Use the up and down arrow keys to move the bracket selector to an option on the
Configure EEROM Parameters
menu (or type the letter of the option in
parentheses) and press
Enter
to select the option.
Figure 4–3 The EEROM Configuration Utility 1020 Main Menu
-------------------------------------------------------------
ISP1020/1040 EEROM Configuration Utility V2.1
-------------------------------------------------------------
+========Configure EEROM Parameters========+
||
| [ (L)oad Default EEROM Parameters ] |
| Edit EEROM (H)ost Adapter Parameters |
| Edit EEROM (D)evice Parameters |
| E(x)it |
||
+==========================================+
Figure 4–4 The EEROM Configuration Utility 1040 Main Menu
-------------------------------------------------------------
ISP1020/1040 EEROM Configuration Utility V2.1
-------------------------------------------------------------
+========Configure EEROM Parameters========+
||
| [ (L)oad Default EEROM Parameters ] |
| Edit EEROM (H)ost Adapter Parameters |
| Edit EEROM (D)evice Parameters |
| Enable (U)ltra [FAST-20] on all devices |
| Enable [FAST-10] on all devices| |
| E(x)it |
||
+==========================================+