User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter
4–4 EK–KZPBA–UG. B01
4.2.2.2 Systems With AlphaBIOS
For systems with AlphaBIOS, follow these steps to start the
EEROM
Configuration Utility
:
1. If your system runs Windows NT, go to Step 3; otherwise continue with
Step 2.
2. If your system is running SRM console, set the
os_type
variable to NT by
typing:
set os_type NT;
then reboot your system.
NOTE
Remember to reset your system back to the SRM
after running the configuration utility. Here are the
steps to do:
• Select
CMOS Setup and press
Enter
.
• In the
CMOS Setup screen press
F6
; the
Advanced CMOS Setup screen is displayed.
• Select
DIGITAL UNIX (SRM) or DIGITAL
OpenVMS (SRM) , and press
F10
.
• The
CMOS Setup screen is again displayed;
press
F10
to save the change.
• Reset the system.
3. Press
F2
for Setup. The
AlphaBIOS Setup
screen appears.
4. Select
Utilities
from the
AlphaBIOS Setup
menu.
5. Select
Run Maintenance Program
from the
Utilities
menu. The
Run
Maintenance Program
window appears.
6. Type the following at
Program Name
:
eeromcfg
Tab to
Location:
and use the arrow keys to select the correct location of the
program, either
a:
for floppy diskette or
CD:
for CD-ROM.
7. Press the
Enter
key. The
ISP1020/1040 EEROM Configuration Utility
V2.1
screen appears similar to the one shown in Figure 4–2.