User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter

4–2 EK–KZPBA–UG. B01

4.2.1 Setting Terminal

To display the

EEROM Configuration Utility

on a VT320, or newer generation

terminal, set your terminal to: VT300 mode, 8 bit controls.

4.2.2 Starting the EEROM Configuration Utility

Starting the

EEROM Configuration Utility

varies depending upon whether your

system runs AlphaBIOS. For systems without AlphaBIOS go to section 4.2.2.1.

For systems with AlphaBIOS go to section 4.2.2.2.

4.2.2.1 Systems Without AlphaBIOS

For systems without AlphaBIOS, follow these steps to start the

EEROM

Configuration Utility

1. If your system runs Windows NT, it should power up to the ARC console.

The ARC console screen appears as shown in Figure 4–1.

If your system runs DIGITAL UNIX or DIGITAL OpenVMS, set the

os_type

variable to NT by typing:

set os_type NT

, and reboot your

system.

Figure 4–1 The ARC Console Screen

Alpha Firmware Version 4.52

Boot Menu

Boot Windows NT

Boot an alternate operating system

Run a program

Supplementary menu ...

Use the arrow keys to select, then press Enter

2. Insert the floppy diskette containing the

eeromcfg.exe

file into the

appropriate floppy drive.

3. Use the up and down arrow keys to highlight the

Run a Program

option from

the

Boot Menu

on the ARC console and press

Enter

to select it. The

following prompt appears:

Program to run: