User`s guide

Chapter 3. Installing the KZPBA–CA Adapter
EK–KZPBA–UG. B01 3–19
3. To further verify the installation, if desired, press the
Alt-Q
key
combination when the
QLogic Ultra board BIOS initialization
message
appears to start the
QLogic Fast! Utility
.
4. The
QLogic Fast! Utility
displays the selected adapter in the top, left-hand
corner of the main menu. Select the
Scan SCSI bus
option from the
Fast!
Util Options
menu. See Chapter 5 for more details on using the
QLogic Fast!
Utility
.
3.8 Verifying the Installation on AXP-Based Systems with DIGITAL
UNIX and DIGITAL OpenVMS
If you are using the DIGITAL UNIX (OSF/1) or DIGITAL OpenVMS operating
system, verify the proper installation of the KZPBA–CA as follows:
1. Power up your system; the Alpha AXP should go through its start up
sequence and then enter the SRM console.
2. Type:
show config
and press
Return
.
3. Verify that the KZPBA–CA adapter is installed properly by observing the
listing in the configuration display for the "Qlogic ISP1020/1040" module.
The following is an example of a typical display for an AlphaServer 2100
system.