User`s guide

KZPBA–CA PCI-to-UltraSCSI Host Adaptaer
3–16 EK–KZPBA–UG. B01
If you do not see this menu, refer to your system documentation for more
information about initially setting up your Alpha AXP. Return to this procedure
when you have the
Boot Menu
displayed.
2. From the Boot Menu, select the
Supplementary Menu
item.
3. Next, select the
Display Hardware Configuration
item. The system will now
display several pages of information about your Alpha AXP system.
4. Press the
Return
or
Enter
key to verify the devices detected and
supported by the software. Your screen should look similar to the following
depending upon the devices detected and supported.
ARC
Devices detected and supported by the firmware:
eisa(0)video(0)monitor(0)
multi(0)key(0)Keyboard(0)
eisa(0)disk(0)fdisk(0) (Removable)
multi(0)serial(0)
multi(0)serial(1)
scsi(0)disk(3)rddisk(0) (RAW) DEC RZ28 (C) DECX442
scsi(0)cdrom(4)fdisk(0) (Removable) DEC RRD43 (C) DEC0064
scsi(1)disk(1)rdisk(0) (RAW) DEC RZ28 (C) DECX442
scsi(1)disk(2)rdisk(0) (RAW) DEC RZ28M (C) DEC0446
5. Press the
Return
or
Enter
key to move through the pages until your
screen has the
PCI Slot Information
display. Your screen should look similar
to the following example: