User`s guide

EK–KZPBA–UG. B01 3–1
3
Installing the KZPBA–CA Adapter
This chapter describes how to install the KZPBA–CA board into a computer. The
procedures include terminating the SCSI bus, verifying and troubleshooting the
installation, and connecting the board to internal and external SCSI devices.
3.1 Installation Overview
The installation of the KZPBA–CA includes the following steps:
•
Installing the host adapter module into your computer
•
Modifying the contents of the flash EEROM as necessary
•
Loading the appropriate software drivers for the operating system running on
your computer
•
Connecting internal or external SCSI devices to the module
These procedures take approximately 30 minutes to complete.
3.2 Getting Started
Prior to starting the installation, do the following:
•
Check that you have the necessary user-supplied hardware and software
•
Inventory the contents of the KZPBA–CA Host Adapter Kit
•
Back up the computer system