Installation guide

Adapter Setup
2-15
2. Deactivating On-Board Termination through the BIOS.
3. Disabling Power-On Reset, then go to Booting Windows NT.
Booting Windows NT
Boot Windows NT on both servers if Windows NT did not already boot when
you exited the host adapter BIOS.
Installing Adaptec Host Adapter Device Drivers
To install Adaptec host adapter device drivers, follow these steps (Adaptec
Windows NT diskette contains the appropriate drivers):
1. Log onto the Windows NT system with Administrator privileges.
2. Click on the Windows NT Setup icon in the main program group.
3. Select the Options menu in the Windows NT Setup window.
4. Select the Add/Remove SCSI Adapter function.
5. Click on the Add button in the dialog box.
6. A warning message is displayed; click on the OK button in the Confirm
box.
7. From the list of adapters on the display, scroll to the end of the list, and
select Other. You may have to click on the list to reveal all of the options
including the “Other” option. The Insert Disk window is displayed.
8. Insert the Adaptec Family Driver set diskette for Windows NT, which came
with the adapter in your platform kit, into your system’s floppy drive.
9. Type, for example: A:\winnt\4_0 and click OK. Windows NT Setup
momentarily displays a window and then displays the Select OEM
Option window.
10. Click OK to select the driver entry displayed in the Select OEM Option
window. The Select SCSI Adapter Option window is displayed.
11. Click Install to add the selected driver displayed in the Select SCSI
Adapter Option window. The SCSI Adapter Setup Window appears.