Installation guide

Configuring the Personality Module
2-10
Figure 4. DIP Switch Location on Differential UltraSCSI Personality Module
(Top view)
NOTE:
Switch position may be described as “ON”, “OFF”,
“CLOSED”, or “OPEN”. In this Guide:
“ON” = “CLOSED”
“OFF” = “OPEN”
In all cases the SCSI bus termination switch (S4) will have all four DIP switches
in the “OFF” position. The SCSI bus address switch (S3) will have all seven
DIP switches in the “OFF” position for the enclosure with SCSI ID0 through
SCSI ID5. The SCSI bus address switch (S3) will have DIP switches 1, 2, and 3
in the “ON” position and switches 4, 5, 6, and 7 in the “OFF” position for the
enclosure with SCSI ID8 through SCSI ID14. Refer to Figure 4 and Table 7.