Installation guide

UltraSCSI Dual BA356 Configuration
2-8
Table 2 on page 2-4 lists the parts provided in the kit for a single BA356
Rackmount configuration. Table 5 below lists the single BA356 Rackmount
configuration plus the additional parts required for a dual BA356 Rackmount
configuration.
Table 5. Parts List for Dual BA356 Rackmount Configuration
Part number Quantity Description
FR-BA356-JF
∗
1 UltraSCSI Wide Differential Rack Expansion Enclosure
(includes 1 Power Supply - BA35X-HH, and a Differential
UltraSCSI Personality module – BA35X-DA)
BA35X-HH 1 Optional, 2nd power supply (180 watts) – for redundancy
DS–BA35X–DA 1 Included with FR-BA356-JF, differential UltraSCSI
Personality Module
∗∗
DS–BN37A–05
∗
1
5.0 meter VHDCI male to VHDCI male
∗∗∗
DS–BN38E–0B
∗
1 0.2 meter VHDCI female to Straight HD68 male
DS–BN21W–0B 2 “Y” Cable, 0.15 meter, one HD68 male to two HD68
females
DS–BN21K–05 1
5.0 meter HD68 male to Right HD68 male
∗∗∗
H879–AA 1 HD68 SCSI-3 Wide Differential Terminator (male)
2944UW 2 PCI to SCSI, Ultra Wide, Differential Host Adapter
BA35X-RB
∗
1 Rack mounting Kit
FR-PCSRA-DJ
∗
1 Chassis support rails
FR-PCSRA-DP
∗
1 19" Mounting Angle
* One of each of these items must be ordered separately to upgrade from a single rackmount configuration
to a dual rackmount configuration.
** The Differential UltraSCSI Personality module is part of the BA356-KH UltraSCSI Differential Expansion
Enclosure. The BA356-KH UltraSCSI Differential Enclosure will accept only one Personality module.
∗∗∗
The sum of the lengths of these cables must not exceed 24 meters.