Installation guide

UltraSCSI Dual BA356 Configuration
2-7
Table 1 on page 2-3 lists the parts provided in the kit for a single BA356
Pedestal configuration. Table 4 below lists the single BA356 Pedestal
configuration plus the additional parts required for a dual BA356 Pedestal
configuration.
Table 4. Parts List for Dual BA356 Pedestal Enclosure Configuration
Key Part number Quantity Description
1
FR-BA356-KH
∗
2 UltraSCSI Wide Differential Pedestal Expansion
Enclosure (includes 1 Power Supply - BA35X-HH,
and a Differential UltraSCSI Personality module –
BA35X-DA)
2 BA35X-HH 1 Optional, 2nd power supply (180 watts) – for
redundancy
3 DS–BA35X–DA 2 Included with FR-BA356-KH, differential UltraSCSI
Personality Module
∗∗
4
DS–BN37A–05
∗
2
5.0 meter VHDCI male to VHDCI male
∗∗∗
5
DS–BN38E–0B
∗
2 0.2 meter VHDCI female to Straight HD68 male
6 DS–BN21W–0B 2 “Y” Cable, 0.15 meter, one HD68 male to two HD68
females
7 DS–BN21K–05 1
5.0 meter HD68 male to Right HD68 male
∗∗∗
8 SWXA3-BD 2 PCI to SCSI, Ultra Wide, Differential Host Adapter
* One of each of these items must be ordered separately to upgrade from a single pedestal configuration to a dual
pedestal configuration.
** The Differential UltraSCSI Personality module is part of the BA356-KH UltraSCSI Differential Expansion
Enclosure. The BA356-KH UltraSCSI Differential Enclosure will accept only one Personality module.
∗∗∗
The sum of the lengths of these cables must not exceed 24 meters.