User`s guide

RAID Array 3000 Pedestal Enclosure
5–2 EK–SMCPO–UG. A01
Figure 5–1 Second Controller Slot Location
3
0
0
0
-4
8
Second
Controller
Slot
5.2 Installation Procedure
CAUTION
To prevent an electrical discharge from damaging
the SIMMs, always wear an ESD wrist strap con-
nected to a suitable ground when handling the
memory modules.
1. Ensure that the UltraSCSI bus is in a quiescent state (no I/O activity).
2. Shut down the host system.
3. Issue a “shutdown” command from the SWCC console to the pedestal con-
troller.
4. Power off the pedestal(s) and the UPS.