User`s guide

Contents
EK–SMCPO–UG. A01 vii
Tables
1–1 RAID Array 3000 Part Numbers and Model Descriptions......................1–3
1–2 Pedestal Specifications........................................................................1–12
1–3 Pedestal Physical and Power Specifications......................................... 1–13
2–1 Controller Specifications.......................................................................2–4
2–2 LED/Reset Switch Interface..................................................................2–6
2–3 RAID Levels Supported ......................................................................2–10
2–4 Pedestal RAID Set Restrictions ...........................................................2–10
2–5 RAID 0+1 Example.............................................................................2–14
2–6 System Parameters..............................................................................2–19
2–7 Backup Power Management................................................................2–21
2–8 Acceptable System Voltage Levels .....................................................2–22
2–9 Acceptable Termination Voltage Levels..............................................2–23
2–10 Acceptable 12 Volt Levels ..................................................................2–23
2–11 Acceptable External Temperature Voltage Levels...............................2–24
2–12 Acceptable Board Temperature Voltage Levels...................................2–24
3–1 Disk Drive SBB Status LEDs................................................................3–3
3–2 SCSI Bus Length and External Cables.................................................3–11
3–3 Assigned Slot Device Addresses in the Pedestal..................................3–11