Installation guide

EK–SM3KA–IG. A01 vii
About This Guide
This section identifies the audience of this guide and describes the contents (chapter-by-
chapter) and structure. In addition, this section includes a list of associated documents
and the conventions used in this guide.
Intended Audience
This guide is intended for installers and operators of the RAID Array 3000
storage subsystem. Installing the subsystem requires a general understanding of
basic SCSI terminology and product installation procedures.
Document Structure
This guide contains the following sections:
Chapter 1 Chapter 1 describes the Expansion Pedestal Option and how to install it.
1.0 Introduction Introduction
provides a summaryof the content of this
guide.
2.0 Product Description Product Description
describes the major
features of the expansion enclosure and its major components and how to
convert the UltraSCSI bus in the base pedestal from a split-bus to a through–
bus configuration.
Associated Documents
In addition to this guide, the following documentation is useful to the reader:
Table 1 Associated Documents
Document Title Order Number
StorageWorks RAID Array 3000 Storage Subsystem
Hardware User’s Guide
EK–SMCPO–UG
StorageWorks RAID Array 3000 Configuration and
Maintenance Guide
EK–SMCS2–UG
Installation Instructions for the RAID Array
Replacement Controller – SWXRC-03
EK–SMCPL–PN