Installation guide

RAID Array 3000 Storage Subsystem Expansion Pedestal Option
1–12 EK–SM3KA–IG. A01
14. Reinstall the side panel on the base pedestal.
15. Connect the HD68-to-HD68 SCSI cable from the D1 OUT connector on the
base pedestal to the D1 IN connector on the rear of the expansion pedestal as
shown in Figure 1-14.
Figure 1–14 Connect SCSI Cable Between Pedestals
3
0
0
0
-47
Base
Pedestal
Expansion
Pedestal
16. Make the power cable connections between the expansion pedestal, the UPS,
and the ac power source (see Figure 1-15).