Installation guide

Chapter 1. Expansion Pedestal Option
EK–SM3KA–IG. A01 1–3
•
The expansion pedestal contains two interchangeable fan-cooled ac power
supplies for redundant power
•
The expansion pedestal is equipped with an internal configuration switch
which selects one of the eight (0 through 7) subsystem configurations (set to
the correct configuration setting at the factory to properly integrate the ex-
pansion pedestal to the controller pedestal)
Figure 1–2 Expansion Pedestal Slot Locations and ID Addresses
3000-19A
EXPANSION PEDESTAL
SLOT 6
SLOT 5
SLOT 4
SLOT 3
SLOT 2
SLOT 1
SLOT 0
ID = 8
ID = 14