Installation guide
EK–SM3KC–IG. C01 vii
About This Guide
This section identifies the audience of this guide. It also describes its contents and
includes a list of associated documents and the conventions.
Intended Audience
This guide is intended for installers and operators of the RAID Array 3000
pedestal and controller shelf storage subsystems. Installing the subsystems and its
components (options) requires a general understanding of basic SCSI
terminology and product installation procedures.
Document Structure
This guide contains the following sections:
1.0 Introduction –
summarizes the content of this guide.
2.0 Install Firmware Upgrade
– includes the steps required to install the second
controller option into the pedestal or controller shelf enclosures. The Information
includes saving the existing configuration using the SWCC console, upgrading the
firmware, and installing the cache memory SIMM modules to accommodate the second
controller.