Manualshelf

Installation guide

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorRAID Array 3000 storage subsystem
11121314151617181920
Second Controller Option
EK–SM3KC–IG. C01 9
2.6. Restore Configuration
To restore your configuration to the new controller:
1. Restart SWCC in the “Serial Mode”. (See section 1.0 in your RA3000 Getting
Started Manual.)
2. Select the
Storage
pull-down menu from the Toolbar, then choose
Controller
.
3. From the
Controller
pull-down menu (Figure 9), select
Configuration
, and
then
Restore
.
Figure 9. Restoring Configuration to New Controller
The saved configuration screen with a “Restore from File” field appears as shown in
the example of Figure 10.