Installation guide

RAID Array 3000 Storage Subsystem
4 EK–SM3KC–IG. C01
Figure 3. Saved Configuration
.
2.2 Update Firmware
CAUTION
If the systems disk is on the RA3000, firmware cannot
be upgraded with SWCC. Establish a temporary sys-
tem disk on a disk drive outside the RA3000 and pro-
ceed with these instructions or follow the alternative
shown in Section 2.2.2
2.2.1 Update Firmware Using SWCC
Start SWCC and choose
SCSI
or
Network Connection
. From the
Storage
menu
(see Figure 4), select
Controller
, and then select
Update Firmware
.
Figure 4 Update Firmware Command
A window will appear (see Figure 5) asking you to specify the firmware file that you
want to load. This file resides on the CD supplied with the controller kit option. You
can easily identify Firmware software by its
.fdi
extension. Enter the .
fdi
file
name (for example, D:\firmware\xxx.fdi), then click
Start Update
. Upon completion