Installation guide

Second Controller Option
EK–SM3KC–IG. C01 3
2.1 Save Existing Configuration
NOTE
You must save the subsystem configuration using the
Command Console Client (SWCC) before performing
the installation procedure. Otherwise, the RAID control-
ler may lose your configuration.
To save your current configuration:
Select the
Storage
pull-down menu from the Toolbar (see Figure 2), click on
Con-
troller,
select
Configuration
, and then
Save
.
Figure 2. Saving the Existing Configuration
A saved configuration screen with a “Save to File” field appears as shown in Figure
3. The example below lists the file name as
c:\config1
.
Enter your file name in the “Save to File” field and click on
Save