Installation guide

RAID Array 3000 Storage Subsystem
2 EK–SM3KC–IG. C01
Figure 1 Second Controller Pedestal Slot Location
3000-4
8
Second
Controller
Slot
2.0 Install Firmware Upgrade
CAUTION
To prevent an electrical discharge from damaging the
SIMMs, always wear an ESD wrist or foot strap con-
nected to a suitable ground when handling the memory
modules.
NOTE
You can upgrade your firmware using the SCSI or net-
work connection methods. These methods provide the
fastest way to upgrade your firmware. To update your
controller’s firmware, proceed as follows.