User`s guide

RA8000/ESA12000 HSG80 Solution Software V8.5 for Sun Solaris
Page 8 387372-005 AA–RFBPE–TE
3.2 Dynamic Volume Expansion
Dynamic Volume Expansion creates a specialized volume, called a concatset
(short for concatenation set), from a storageset that has been given a unit
number. Another storageset can then be added to the concatset by the SET
concatset command.
Dynamic Volume Expansion is supported on the Sun platform. Refer to section
7.18 for information on using this feature.
3.3 Increase Host Connection
The maximum number of host connections has been increased from 32 to 64, for
the table of known connections. This table is maintained in the controller’s
memory. If the table contains 64 entries, new connections cannot be added
unless some old ones are deleted.
3.3 CLI Commands
ADD CONNECTION and SET <connection> now support the following
Operating Systems:
• TRU64_UNIX
• IBM
• SUN
• VMS
• WINNT
• SGI
• HP
• NOVELL
NOTE:
The default operating system value for a
connection is WINNT. For proper operation,
please change this to SUN by using the
following CLI command (example is given
for the connection named !NEWCON01):
SET !NEWCON01 OPERATING_SYSTEM=SUN