User`s guide

Release Notes
AA–RFBPE–TE 387372-005 Page 7
Verification of the individual components can be done with Explorer by right-
clicking on the particular executable program in its folder and selecting the
Properties option. In the resulting Properties window, click on the Version tab
and select the Product Version to display the version of the program.
Compaq Insight Manager Integration
This release of the SWCC Client kit is not integrated with Compaq Insight
Manager. Please check on Compaq’s StorageWorks Storage Management
Software website at:
www.compaq.com/products/storageworks/storage-management-
software/swccdownload.html
for updates on Compaq Insight Manager integration.
SWCC Manual Refresh Rate
We recommend that you do not refresh SWCC windows more often than once
every 30 seconds.
Storage Area Network (SAN) Configuration
In a SAN configuration, there should be only one SWCC Agent per RAID
system. We do not support multiple Agents managing the same RAID system.
3.0 NEW FEATURES
This section briefly describes features that are supported by the HSG80
controller. For more information on these features, see the HSG80 Array
Controller ACS Version 8.5 Configuration and CLI Reference Guide.
3.1 External Cache Battery
Compaq recommends that you replace the ECB every two years to prevent
battery failure.
If you are shutting down your controller for longer than one day, complete the
additional steps in “Shutting Down the Subsystem” in the HSG80 Array
Controller ACS Version 8.5 Maintenance and Service Guide. This will prevent
the ECB from discharging during planned power outages.