User`s guide

Release Notes
AA–RFBPE–TE 387372-005 Page 55
Windows 95 Memory Leak
When you run SWCC on Windows 95, the operating system will gradually
increase its use of memory, especially when SWCC opens and closes a large
number of sockets. Microsoft has released an upgraded version of kernel32.dll
that corrects this situation. This file is available from the following website:
www.microsoft.com/windows95/downloads/contents/wuadmintools/s_wunetwor
kingtools/w95kernel32/default.asp
The following is the name of the file:
kernel32.dll version 4.00.951 (7/29/97, 337016 bytes) or later
NOTE:
Microsoft may not support the Kernel32
upgrades on all versions of Windows 95.
Check Microsoft’s website to determine if it
is supported for your operating system
revision and language kit. Do not install the
kernel32 upgrade unless Microsoft supports
it.
10.9 Troubleshooting Connection and Access Problems
This section documents known connection problems and suggests some
solutions. SWCC is a TCP/IP socket-based application. As a result, SWCC
requires that each node running a SWCC Client or Agent must have access to a
valid hosts file or Domain Name Service (DNS) server. The valid hosts file must
include at least the system itself and any other systems running a SWCC Client
or Agent that it will connect to.
Dynamic Internet Protocol Address Allocation Not Supported
SWCC will not work properly if the client systems or agent systems are
obtaining an IP address dynamically. This is because the Dynamic Host
Configuration Protocol (DHCP) is not supported. RAS servers and IP tunneling
servers are supported only if they are configured to nondynamic IP addresses.