User`s guide

RA8000/ESA12000 HSG80 Solution Software V8.5 for Sun Solaris
Page 34 387372-005 AA–RFBPE–TE
Case Sensitivity in Agent STORAGE.INI File
If you choose to manually edit an Agent STORAGE.INI file, enter storage
subsystem names only in lower-case form. If you use upper-case characters in a
name, Client and Agent may not be able to communicate because of a name
mismatch.
Case Sensitivity in Agent CLIENT.INI File
For Windows NT and UNIX-based Agents:
If you choose to manually edit an Agent client.ini file, enter Client names
exactly as formatted within your network. The names you enter must match the
names your name server recognizes, or Client and Agent may not be able to
communicate with each other.
ServerWORKS Connections
You can manually configure any Agent to send SNMP traps to a host running
Digital Equipment Corporation’s ServerWORKS by editing the client.ini file.
Edit the file to include the ServerWORKS host name and SNMP notification.
Running Client via Network Connections
You can operate Client over PPP, SLIP, or RAS network connections. Be aware
though, that some restrictions on features exist. See Operating Constraints.
Display in VGA Mode
There are numerous issues involving the use of Client on a system with standard,
VGA resolution. The Storage window requires a minimum amount of screen
space to properly display its contents. When you use VGA display resolution,
screen space becomes more limited. It is highly recommended that you use
Client with a minimum of SVGA (800x600) display resolution.