Installation guide
23
Hardware Specifications
Controller Specifications
Attribute Specification
Slot requirement One industry-standard EISA bus master slot
On-board processor 16 MHz 80C186EB
FLASH memory 256 KB
Main memory 512 KB SRAM
Server console monitor and keyboard monitoring 6-pin DIN for keyboard
Internal monitoring sensors Integrated voltage and temperature
External monitoring sensors Two inputs: normally open for switch closure
EISA bus signal monitor Noninvasive monitoring of 16 critical EISA bus signals
Status indicator LED Red, orange, or green
Serial interface specification Standard DB25 RS-232, V.24
Baud rate: 300-57.6 Kb (Async)
Operating voltage 5V (+5%, -3%)
Operating current 2.0 A maximum
Power supply noise/ripple 50 mV maximum p-p
External power 5V (+5%, -3%), 0.5A maximum
Dimensions 12.7 cm (5.00 in) high
1.87 cm (0.74 in) wide
34.04 cm (13.40 in) long
Relative humidity Operating: 20% to 80%
Nonoperating: 5% to 90%
Temperature Range
Operating: 10°C to 40°C (54°F to 104°F)
Nonoperating: -10°C to 50°C (14°F to 122°F)
Altitude Operating: 3,048 m (10,000 ft)
Nonoperating: 9,144 m (30,000 ft)