Installation guide

Controller Installation
17
Step 8. Install the SCU files
Start the System Configuration Utility (SCU).
Once prompted for the
config file
(!DEC23F0), insert the configuration diskette
(labeled AK-Q8U3A-CA) that came with the kit and hit the Enter key. This file
also resides in the management workstation's RS_MGR directory.
Select the default BIOS address unless there is a conflict with other installed
EISA options such as a SCSI adapter or LAN card.
If “
No BIOS Address
” is selected, you will not be able to place the server in
HELD Mode or perform any remote diskette operations.
An IRQ is not required because the controller does not have a NOS driver
connection to the operating system.