User`s guide

4. Close the tray door. The elevator moves up automatically and the operator
panel displays the following message until the elevator reaches its operating
position:
Close optional output device cover or door
TAY-2034CD
5. Press
Resume
on the operator panel.
2.3 Turning the Printer and OLCOT On and Off
The power switch on the back of the OLCOT controls the power to both the
OLCOT and the printer. Use this power switch as the Master switch to supply
power to both the printer and the tray.
Avoid turning the printer or OLCOT on and off with the power switch on the
printer and the OLCOT. Powering the printer and OLCOT on and off with both
switches can result in erroneous diagnostic messages.
2–4 User Tasks