User`s guide

Callout Description
The Tray Cover allows access to the transport unit of the large
capacity output tray.
The Transport Unit moves the paper from the printer into the
OLCOT. Paper is delivered to the OLCOT face down. You can lift
the guide in the center of the transport unit to access paper jammed in
that area.
The Elevator moves up and down to accommodate the amount of
paper in the tray.
The Tray Door allows access to the print jobs and components within
the OLCOT.
The Tray Down Key lowers the elevator so you can easily remove
print jobs.
The LEDs indicate the status of the large capacity output tray:
Green Ready LED
Blinking: The elevator or the paper transport is moving.
Solid On: Power is on.
Amber Error LED
Blinking: An error condition exists: the tray is full, the covers are
open, the tray is not in the operating position, or paper is jammed.
1.2 Messages
The following messages could appear on the operator panel of the PrintServer 32
printer:
Optional output tray full
The OLCOT has reached its capacity. See Section 2.2 for instructions on removing
print jobs from the tray.
Clear jam at optional output device
Paper is jammed in the OLCOT. See Section 4.1 for instructions on clearing the
jam.
Close optional output device cover or door
This message is displayed if:
• The cover or door of the tray is open or not secured.
Close the cover and door tightly.
• The elevator is in the down position or is moving up.
If the elevator is in the down position, open and close the cover to move the
elevator to the top of the OLCOT.
PrintServer 32 Printer Optional Large Capacity Output Tray 1–3