Technical data

5 Printing on Different Types of Media
5.1 Printing on Letterhead or Predrilled Paper ................. 5–1
5.2 Printing Labels . . . ................................... 5–3
5.3 Printing on Transparencies . . ........................... 5–6
6 Clearing Front Panel Messages
6.1 Add Paper .......................................... 6–2
6.2 Add Toner and Clean Components........................ 6–2
6.3 Align Paper Flush Against Back of Tray ................... 6–2
6.4 Call Customer Services — Maintenance 1 Required .......... 6–3
6.5 Call Customer Services — Maintenance 2 Required .......... 6–3
6.6 Charge Wire Cleaning In Progress ........................ 6–3
6.7 Cleaning Unit Full, See Operator Guide ................... 6–3
6.8 Deleting Current Job .................................. 6–4
6.9 Fatal Software Error .................................. 6–4
6.10 Hardware Error xx — Call Customer Services............... 6–4
6.11 Insert Paper Cassette ................................. 6–4
6.12 Keypad is Disabled, Cleaning in Progress .................. 6–5
6.13 No Active Job ........................................ 6–5
6.14 No Supplies Needed ................................... 6–5
6.15 One-Sided Test Page .................................. 6–5
6.16 Open Lower Side Door and Clear Paper ................... 6–6
6.17 Open Side Tray . . . ................................... 6–6
6.18 Open Upper Side Door and Clear Paper ................... 6–6
6.19 Output Tray Full . . ................................... 6–6
6.20 Paper Jam 1 — Open Front Cover and See Label . . .......... 6–7
6.21 Paper Jam 2 — Open Front Cover and See Label . . .......... 6–7
6.22 Paper Jam 4 — Open Cabinet Door and See Label . .......... 6–7
6.23 Paper Jam 5 — See Label on Bottom Paper Tray . . .......... 6–7
6.24 Paused — Press Resume to Continue . . ................... 6–8
6.25 Perform User Maintenance . . ........................... 6–8
6.26 Please Wait... ........................................ 6–8
6.27 Print Engine Is in Warmup State ........................ 6–8
6.28 Printing . ........................................... 6–9
6.29 Processing .......................................... 6–9
6.30 Ready . . . ........................................... 6–9
6.31 Reboot or Cycle Power ................................. 6–9
6.32 Reinsert Lower Cassette ............................... 6–10
6.33 Reinsert Upper Cassette ............................... 6–10
6.34 Set Paper Size Dial ................................... 6–10
6.35 Single Job Mode — Press Resume to Continue .............. 6–10
vi