Technical data

6.4 Call Customer Services — Maintenance 1 Required
Explanation:
Customer Services needs to clean and replace various items in the
PrintServer 32 printer.
Action:
Call Customer Services and indicate that Maintenance 1 is needed. See
Chapter 10 for information about calling Customer Services.
6.5 Call Customer Services — Maintenance 2 Required
Explanation:
Customer Services needs to clean and replace various items in the
PrintServer 32 printer.
Action:
Call Customer Services and indicate that Maintenance 2 is needed. See
Chapter 10 for information about calling Customer Services.
6.6 Charge Wire Cleaning In Progress
Explanation:
The transfer/separation charger wire is being cleaned.
Action:
This is an informational message. No action is required. The printer will
resume printing when the cleaning is finished.
6.7 Cleaning Unit Full, See Operator Guide
Explanation:
The cleaning unit is full of toner and needs to be replaced.
Action:
Replace the cleaning unit, using the procedures in the PrintServer 32
Printer Cleaning Unit Kit Guide.
Clearing Front Panel Messages 6–3