Instruction manual

Using the Optional Large Capacity Input Tray
1.2 Adding Paper
3. Open the OLCIT door .
Remove the two smaller paper trays above the OLCIT. This makes for
easy loading of paper and reduces the likelihood of paper jams.
DSG-000500
4
4. Fan about half a ream of paper at a time to release any static electricity.
Tap the paper on a hard surface to align the edges.
Insert the paper until the leading edge touches the back of the tray.
Make sure the edges or corners of the paper are not folded during
loading.
DSG-000498
Using the Optional Large Capacity Input Tray 1–5