Instruction manual

Using the Optional Large Capacity Input Tray
1.4 Troubleshooting
1.4 Troubleshooting
Note
If the paper selection knob and the paper adjustment levers are not set to
the paper size loaded in the OLCIT, paper jams will occur.
Table 1–2 shows the LEDs and what to do to correct the situations listed.
Table 1–2 OLCIT LEDs
This LED . . . Lights When . . . And you need to . . .
Paper Mis-set The paper size selection knob
is between detented settings.
Position the paper size selection
knob correctly.
Cover Open OLCIT cover is open. Make sure the OLCIT cover is
closed.
Elevator Push
Button
Elevator is moving. None
Table 1–3 shows the print errors that might occur and what to do to correct
them.
Table 1–3 Print Errors
Print Error Corrective Action
Paper Jam Clear the jam. See the PrintServer 32 Printer
Operator’s Guide for instructions on clearing paper
jams inside the PrintServer. See Section 1.3 of this
guide for clearing paper jams in the OLCIT, then see
the Corrective Action section of Table 1–2 in this guide
for instructions.
If you cannot correct the problem or the operator panel instructs you to call
Customer Services, the OLCIT requires servicing by a qualified Customer
Services engineer.
Digital has a service center in your area to help keep your system running
properly.
Where Type of Service Telephone Number
North America On-site warranty 1–800–354–9000
All Other
Locations
Call your local sales office
Using the Optional Large Capacity Input Tray 1–11