PrintServer 32 Printer Optional Large Capacity Input Tray Operator’s Guide Revision/Update Information: This is a new manual. Order Number: EK–PSLCO–OC.
First Printing, March 1994 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description.
Contents 1 Using the Optional Large Capacity Input Tray 1.1 1.2 1.3 1.4 1.5 Supported Paper Sizes Adding Paper . . . . . . . Clearing Paper Jams . Troubleshooting . . . . . Service Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Using the Optional Large Capacity Input Tray This book describes the following operator functions for the PrintServer 32 Printer Optional Large Capacity Input Tray (OLCIT). • Adding paper (capacity 3000 sheets of 20 lb paper) • Clearing paper jams • Troubleshooting Refer to the PrintServer 32 Printer Operator’s Guide for information on using the PrintServer 32 printer.
Using the Optional Large Capacity Input Tray 1.1 Supported Paper Sizes Parts of the OLCIT The following illustration and table describe the parts of the OLCIT.
Using the Optional Large Capacity Input Tray 1.2 Adding Paper 1.2 Adding Paper This section explains how to add paper to the OLCIT. Note When adding paper, make sure the PrintServer is not in the process of printing and the operator panel reads Ready. 1. Press Pause on the PrintServer 32 operator panel.
Using the Optional Large Capacity Input Tray 1.2 Adding Paper 2. Press the Tray Down button on the OLCIT. LT 3 A4 2 LTR ADJUST AT 3 PLACES 1 A4R A4R LTR A4R LT LTR LT A4 A4 Be sure the paper tray has stopped before continuing with the procedure. Paper Mis-set Cover Open 1 DSG-000496 Note If the tray runs out of paper while printing, the tray automatically lowers. The elevator tray hesitates momentarily about half way up or down in its travels and the Cover Open LED goes on momentarily.
Using the Optional Large Capacity Input Tray 1.2 Adding Paper 3. Open the OLCIT door . Remove the two smaller paper trays above the OLCIT. This makes for easy loading of paper and reduces the likelihood of paper jams. 4 DSG-000500 4. Fan about half a ream of paper at a time to release any static electricity. Tap the paper on a hard surface to align the edges. Insert the paper until the leading edge touches the back of the tray. Make sure the edges or corners of the paper are not folded during loading.
Using the Optional Large Capacity Input Tray 1.2 Adding Paper Note Sloppy paper loading or folded/damaged paper edges and corners can cause printer paper jams. • Use recommended paper only, as listed in the PrintServer 32 Printer Operator’s Guide. • Do not add more than six reams of paper to the paper tray. Adding more paper or loading the paper unevenly puts stress on the paper tray motor and causes paper jams. 5. Close the OLCIT door .
Using the Optional Large Capacity Input Tray 1.2 Adding Paper 6. Make sure the two paper adjustment levers and the paper selection knob are set to the identical setting for the paper size you just loaded. 3 A4 3 LT 2 LTR ADJUST AT 3 PLACES 1 A4R LTR A4R A4R LT LTR LT A4 A4 2 Paper Mis-set Cover Open DSG-000499 7. Press Resume on the PrintServer 32 operator panel.
Using the Optional Large Capacity Input Tray 1.3 Clearing Paper Jams 1.3 Clearing Paper Jams This section explains how to clear paper jams from the OLCIT. 1. Press Pause on the PrintServer 32 operator panel. 2. Press the Tray Down button on the OLCIT. LT 3 A4 2 LTR ADJUST AT 3 PLACES 1 A4R A4R LTR A4R LT LTR LT A4 A4 Be sure the paper tray has stopped before continuing with the procedure.
Using the Optional Large Capacity Input Tray 1.3 Clearing Paper Jams 3. Open the OLCIT door . 4 DSG-000500 4. Remove all jammed paper from the PrintServer and the PrintServer’s cavity.
Using the Optional Large Capacity Input Tray 1.3 Clearing Paper Jams 5. Close the OLCIT door . 4 DSG-000497 Note The elevator moves the paper stack to the top of the OLCIT automatically. 6. Press Resume on the PrintServer 32 operator panel.
Using the Optional Large Capacity Input Tray 1.4 Troubleshooting 1.4 Troubleshooting Note If the paper selection knob and the paper adjustment levers are not set to the paper size loaded in the OLCIT, paper jams will occur. Table 1–2 shows the LEDs and what to do to correct the situations listed. Table 1–2 OLCIT LEDs This LED . . . Lights When . . . And you need to . . . Paper Mis-set The paper size selection knob is between detented settings. Position the paper size selection knob correctly.
Using the Optional Large Capacity Input Tray 1.5 Service Notes 1.5 Service Notes The OLCIT is similar in operation and service to the 1000 sheet LCIT. The OLCIT has an internal controller that operates the elevator tray motor and signals the PrintServer duplexer-table controller. The 1000 sheet LCIT has no internal controller and its motor and other functions are controlled directly by the duplexer-table controller.
How to Order Additional Documentation Technical Support If you need help deciding which documentation best meets your needs, call 800-DIGITAL (800-344-4825) and press 2 for technical assistance. Electronic Orders If you wish to place an order through your account at the Electronic Store, dial 800-234-1998, using a modem set to 2400- or 9600-baud. You must be using a VT terminal or terminal emulator set at 8 bits, no parity.
Reader’s Comments PrintServer 32 Printer Optional Large Capacity Input Tray Operator’s Guide EK–PSLCO–OC. A01 Your comments and suggestions help us improve the quality of our publications. Thank you for your assistance.
Do Not Tear – Fold Here and Tape No Postage Necessary if Mailed in the United States TM BUSINESS REPLY MAIL FIRST CLASS PERMIT NO. 33 MAYNARD MASS.
