Installation guide

Ozone Safety
The PrintServer 32 printer uses an ozone filter to remove the ozone generated
by the printer. Be sure to replace the ozone filter each time user maintenance
is performed on the printer.
Warning
Do not operate the printer without the ozone filter installed. The filter
removes ozone that may cause eye or respiratory irritation.
Before You Start
Before you install the PrintServer 32 printer, be sure you have the following
items (see Figure 1):
• Print engine and cabinet (packaged in one box). Also in this box are
Shipaway Kits A and B. See Chapter 2 for items supplied in the shipaway
kits.
• Bottom paper tray, shipped in its own box.
• Software Kit (optional), which contains software documentation and media.
• Country Kit (non-U.S. only), which contains translated hardware
documentation, overlays, labels, and the appropriate power cord.
If any items are missing or damaged, immediately contact your sales
representative and delivery agent or your DECdirect customer service
representative.
Special Tools
The only tools you need to install the PrintServer 32 printer are the open-end
wrench and the Phillips screwdriver supplied in Shipaway Kit B. You need a
razor knife to open the boxes.
Warning
The printer is heavy. To avoid injury, use two people to roll the printer
down the shipping pallet ramp. Do not attempt to roll the printer down
the shipping pallet alone.
xi