Installation guide

9
Running the Power-Up Test
This chapter explains how to power up the PrintServer 32 printer and check
for correct operation. It also tells you what to do if you have a problem with
the installation.
Note
Install the software before powering up the PrintServer 32. The printer
does not power up correctly if the software has not been installed.
9.1 Powering on the Printer
The power-up test runs automatically each time the PrintServer 32 powers on.
Power on the printer, using the following procedure:
1. Press the power switch on the left side of the printer to the 1 (ON) position.
Running the Power-Up Test 9–1