Manualshelf

Installation guide

ManualsBrandsDigital Equipment Corporation ManualsAll in One PrinterPrintServer 32Printer
61626364656667686970
7.2 Connecting the ThinWire Ethernet Cable
Connect the ThinWire Ethernet cable with the optional DESTA adapter, using
the following procedure:
1. Connect the following components in the order given:
a. Connect the 50-ohm terminator to the T-Connector.
b. Connect the Radio Frequency Suppression (RFS) adapter cable to the
T-Connector.
c. Connect the ThinWire Ethernet Cable to the RFS adapter cable.
d. Connect the T-Connector to the DESTA.
Connecting Ethernet and Power Cables 7–7