Installation guide

7
Connecting Ethernet and Power Cables
The next step in the installation is to connect the Ethernet and power cables.
You need the following items to connect the PrintServer 32 printer to the
Ethernet:
H4000 Ethernet or DELNI connection
A standard Ethernet cable
or
ThinWire Ethernet cable with a DESTA ThinWire Ethernet Adapter
Note
The H4000 Ethernet, DELNI connection, and DESTA must be
configured to produce a ‘‘heartbeat’’, which is necessary to interface the
PrintServer 32 with the network. See your DESTA manual or network
device manual for configuration information.
Connecting Ethernet and Power Cables 7–1