Installation guide

2. Remove the tape from the plastic bag around the bottom of the cabinet and
lift the plastic bag straight up to remove it.
If excess plastic remains around the shipping pallet, you can pull the
plastic out of the way or cut it with a razor knife to remove it.
3. Raise the four leveling pads to the full up position by turning them
counterclockwise.
4. Remove the four shipping bolts that secure the printer to the pallet. The
printer will rest on its wheels.
Remove the spacers and square washers.
Note
Discard any silica bags that may be on the shipping platform under the
printer.
2–6 Unpacking the Print Engine and Cabinet