Specifications

PDP-11 TABLETOP UcFENSfdh MOUNTING BOX (BAll-EC)-The tabletop
Extension Box is supplied, when ordered, for mounting of up to 6 additional
System Units which can not be contained in the Basic Mounting Box. This
unit is supplied with:
1. 15' of power cord with ground wire
+ For 115 V standard, 3-prong, U-ground, 15-ampere connector
+ For 230 V pigtail leads on one end
2. Cooling Fans
3. Filter
4. Front Panel
5. Unibus Cable from Basic Mounting Box, 8’6” long
Approximate Size-11" high, 20” wide, 24” deep
Power-120 V -C lo%, 47-63 Hz 6 amps. r
single phase
(when H720-A is added)
230 V + 10%,47-63 Hz
3 amps. single phase
‘)
(when H720-B is added)
PDP-Ll EXTENSION MOUNTING BOX(BAll-ES)-The Extension Box is sup
plied, when ordered, for mounting of up to 6 additional System Units which
can not be contained in the Basic Mounting Box. This unit contains:
1. Tilt and Lock chassis slides
2. 15’ of power cord with ground wire
+ For 115 V standard, 3-prong, U-ground, 15-ampere connector
+ For 230 V pigtail leads on one end
3. Cooling Fans
4.. Filter
5. Front Panel
6. Bus Cable from Basic Box, 8’ 6” long
Approximate size--101/z” high, 19” wide, 23” ,deep
Power-120 V + lo%, 47-63 Hz 6 amps.
(when H720-A is added).
230V +10%,47-63 Hz 3 amps.
(when H720-B is added)
single phase
single phase
PDP-11 FREESTANDING BASE CABINET (H969CA)This optional cabinet
cabinet can be used to mount the BAll-CS Basic Mounting Box and a
BAll-ES Extension Mounting Box supplied with Tilt and Lock chassis slides
in addition to other PDP-11 equipment.
.
.
Panel capacity is six lOI/” high mounting spaces, each of which is covered
with black plastic panels if equipment is not mounted-(5 panels, maximum,
supplied).
items supplied with the cabinet include:
1. H950-A Frame
2. H952-E Coasters
3. H-952-F Levelers
4. H-952-C Fan Assembly (in top of cabinet)
5. H-950-S Filter
6. PDP-11 Logo
7. H-950-B Rear Door
8. lOl/," Plastic Bezels, maximum of 5 supplied
9. Two H952-A End Panels
80