Technical information

2.4.3 ADV11-S Analog-to-Digital Converter
The ADVll-S is an analog-to-digital converter with DMA capability. The
ADVll--S is functionally equivalent to an ADVll-D.
Functional Information
Input channels
Programmable gain
AID output
Resolution
Data notation
AID conversions
AID results
Interrupts
Common mode rejection ratio (gain=l)
Ordering Information
ADVll-SF
UDIP-BAI
UDIP-AB
UDIP-TA
Performance
Analog input
No. of analog inputs
Input range
Maximum input signal
Input impedance
Off channels
On channels
16 single-ended analog input channels or 8
differential
analog input channels; SEIDl input is
jumper-selectable.
1,2,4, or 8
12-bit
output data resolution
Binary, offset binary, or two's complement
Can be started by a program, a real-time clock, or
an external trigger
Can be received by a programmed I/O transfer or
by servicing
an interrupt request
Can be enabled and automatically set by AID
DONE and/or ERROR bits
80 dB at maximum range
ADVll field-installed kit
Universal data interface panel (UDIP) mounting
box
Universal data interface panel (UDIP) for ADVll-
S
Tabletop enclosure
8
channels using differential inputs or 16 channels
using single-ended inputs
o V to +10 V (unipolar)
-10 V to +10 V (bipolar)
±10.5 V (signal + common mode voltage)
100 Mn minimum, 10 pF maximum
100 Mn minimum, 100 pF maximum
1 You must order both the UDIP mounting box and the UDIP interface when installing a new
option.
Option Specifications 2-47