Technical information

2.4.1 AAV11-S Digital-to-Analog Converter
The AAVll-S is a digital-to-analog converter with DMA capability. The
AAVll-S is functionally equivalent to the AAVII-D.
Functional Information
Circuits
D/A input
Data notation
D/A output
Voltage
Control
signals
Polarity
Ordering Information
AAVll-SF
UDIP-BAl
UDIP-DB
UDIP-TA
Performance
Analog output
Voltage
Current
DC impedance
Linearity (0-10 V)
Differential linearity
Offset error
Offset drift
Gain aecuracy
Gain drift
Settling time
Two D/A converter circuits
12-bit digital input
Binary input notation for unipolar output; offset
binary or two's complement input notation for
bipolar output.
Output voltage range is jumper selectable: :1::10 V,
:1::5 V, or 0 V to +10 V.
4-bit digital output for control signals, such as
CRT intensity, blank, unblank, and erase
Unipolar or bipolar output
AAVll-S field-installed kit
Universal data interface panel (UDIP) mounting
box
Universal data interface panel (UDIP)
Tabletop enclosure
:dO V, at 10 mA
:1::5 V, at 10 mA
o V to 10 V, at 10 mA
10 mA, at 10 V minimum
0.05n typical
:1::112 LSB; :1::1.2 m V at full-scale range
:1::112 LSB
Adjustable to 0
:1::15 ppm/at maximum °C
Adjustable to zero
:1::25 ppm/at maximum °C
6 JlS to 0.1% for a p-p output change of 20 V
lyou must order both the UDIP mounting box and the UDIP interface when installing a new
option.
Option Specifications 2-43