Technical information

Performance
Receive data transfers
Transmit buffer size
Receive
buffer size
Supported baud rates
Throughput at maximum baud rate:
5 data bits, 0 parity bits, 1 stop
bit
7 data bits, 1 parity bit, 1 stop bit
Configuration Information
Form factor
Power requirements
Power consumption
Bus loads
Module connectors
Related Documentation
EK-CXY08-UG
EK-CXY08-TM
Single-character or two-character programmed
transfers, or up to 16-character block mode DMA
transfers in DRUll mode.
Single-character programmed transfers in both
DHVll and DRUll modes.
One character for programmed transfers in
DHVll mode
64-character
FIFO for programmed transfers in
DHUll mode
64-character
FIFO for DMA transfers in DHUll
and DHVll modes
256-character FIFO in DHVll and DHUll modes
16 programmable baud rates: 50; 75; 110; 134.5;
150'300'600' 1200' 1800'2000'2400' 4800'7200'
9600; 19~00;' 38,400
1
' , , , ,
87,771 characters/second (all1ines)
61,440 characters/second (all lines)
Quad height with integral, recessed cover panel
+5 Vdc, 1.64 A (typical)
+12
Vdc, 0.395 A (typical)
12.94 W
3.0 ac
0.5 dc
2 female,
50-pin CHAMP connectors
CXY08 User's Guide
CXY08 Technical Manual
138,400 baud rate is not supported by Digital operating systems.
2-32 VAX 4000 Model 300 Technical Information