Technical information

Example 1--6: SET BOOT Command
»> SET BOOT NOAO
»>
In this example, entering MUAO sets the tape drive as the default boot
device.
Table 1-3: Device Names
Device Type
Controller/Adapter
RF -series ISA Embedded DSSI host adapter
(part of CPU)
RF -series ISA KFQSA storage adapter
TK70 tape drive
TQK70
PROM
(programmable read
MRVll module
only memory)
Ethernet adapter On-board (part of CPU)
Ethernet adapter
DESQA Ethernet controller
RA-series drives
KDA50
1m = nSSI bus adapter (A = first bus (0), B = second bus (1), etc.)
n
= unit number
Device Logical
Name
DImn
l
DUcn
2
MUcn
B
PRAn
EZAO
XQAn
DUcn
2
When under operating system control, DIBn devices are recognized as DIAn devices.
2c = MSCP controller designator (A = first, B = second, etc.)
n
= unit number
Bc = TMSCP controller designator (A = first, B = second, etc.)
n
= unit number
1-12 VAX 4000 Model 300 Technical Information