Technical information

2.5.7 LG31 Printer
The LG31 is a 300-lines-per-minute impact printer with multiple printing
modes and graphics capability.
Performance
Printing speed
Print technology
Character spacing
Line spacing
Paper slew rate
Character set
Graphics
Buffer capacity
Paper
Power Requirements
Line voltage and frequency
Interface (controller) current
Power consumption
Heat dissipation
Data processing mode
Uppercase: up to 300 lines/minute
Uppercase and lowercase: up to 240
lines/minute
N ear-letter-quality mode
Uppercase:
up to 147 lines/minute
Uppercase and lowercase: up to 105
lines/minute
OCRA and OCRB
65 lines/minute
Full-character
t
impact
t
matrix
10/12/13.3/15/16.7 characters/inch
t
with horizontal
and vertical expansion capability
6
t
8
t
or 10 lines/inch
50 cm/second (15 inlsecond)
7-
or 8-bit character sets, ASCII
t
OCRA
t
OCRB
Digital sixel protocol
Firmware-dependent
Fanfold. Form width 7.6 cm x 42.0 cm (3 in x 16.54
in); form length: 0.84
em to 55.9 cm (0.33 in to 22
in)
Multipart forms: up to 6 parts
t
carbon or
carbonless
Thickness:
0.05 cm (0.025 in)
100-240Vac
50-60 Hz
1.5 A at 5.0 Vdc
50 W standby; 400 W printing
171 Btu/hour standby
1368 Btulhour printing
2-74 VAX 4000 Model 300 Technical Information